DURAMAX GPE ZINC PHOSPHATE PART A & B

DUREMAX® GPE ZP has been locally developed specially for Australasian conditions using the latest epoxy technology. DUREMAX® GPE ZP is a general-purpose epoxy primer enhanced with zinc phosphate pigment for inhibitive corrosion protection on mild steel.

DURAMAX GPE PART A & B

DUREMAX® GPE is a high performance two pack epoxy protective coating locally developed specially for Australasian conditions using the latest epoxy technology.

DURAMAX GPE MI0 PART A & B

UREMAX® GPE MIO is a high performance protective coating locally developed specially for Australasian conditions using the latest epoxy technology. DUREMAX® GPE MIO is formulated with micaceous iron oxide pigment for enhanced barrier protection.

DURABILD STE GF PART A & B

DUREBILD STE® GF has been developed specifically for Australasian conditions using advanced epoxy technology and incorporates glass flake for additional barrier protection and abrasion resistance. DUREBILD® STE GF can be top-coated with a wide range of coating types and is available with a bloom-free cold cure hardener.

DURABILD STE PART A & B

DUREBILD® STE is a surface tolerant epoxy developed specifically for Australasian conditions using advanced epoxy technology. DUREBILD® STE can be top-coated with a wide range of coating types and is available with a bloom-free cold cure hardener.

DURABILD HSE PART A & B

DUREBILD® HSE is a high solids, two component epoxy with high build characteristics allowing single coat application up to 500 microns dry film thickness direct to suitably prepared mild steel and over inorganic zinc rich or epoxy anti-corrosive primers.

EPIGLOSS 4 FINISH PART A & B

EPIGLOSS® 4 Finish is a two-pack epoxy coating that provides a high gloss, easily maintained surface in areas of high abuse and under aggressive chemical exposure.

ENVIROPOXY PART A & B

ENVIROPOXY® WBE is a water borne two pack acrylic epoxy topcoat that has been locally developed specially for Australasian conditions. ENVIROPOXY® WBE displays superior gloss retention and resistance to chalking and yellowing when compared to traditional solvent based epoxies.

LUXAFLOOR ECO2 PART A & B

LUXAFLOOR® ECO2® is a low build, water borne, two pack epoxy floor coating that provides a hardwearing surface. It is ideal for use in areas subject to foot traffic. LUXAFLOOR® ECO2® can be applied as a slip resistant finish by the addition of LUXAFLOOR® AGGREGATES. LUXAFLOOR® ECO2® is available in a range of factory made and tinted colours and clear.

LUXEPOXY 4 T PART A & B

EPIGLOSS® 4 Finish is a two-pack epoxy coating that provides a high gloss, easily maintained surface in areas of high abuse and under aggressive chemical exposure.

ACRATHANE IF PART A & B

Acrathane IF is an isocyanate-free catalysed acrylic finish for long term durability in both exterior and interior areas. Its isocyanate free formulation is particularly useful for on-site spray application. Acrathane IF is ideal for public spaces that may be prone to defacement by spray-can graffiti.

LUXATHANE R PART A & B

LUXATHANE® R is a full gloss, two-component acrylic polyurethane that is re-coatable with minimum surface preparation. It is designed for general use in atmospheric chemical and marine service where gloss and colour retention, hardness and abrasion resistance, and wide-ranging chemical resistance are required.

FREKKO 3 PART A & B

FERREKO® No. 3 is a two pack epoxy coating formulated with micaceous iron oxide pigment that imparts outstanding durability and abrasion resistance. The micaceous iron oxide pigment particles interlock in the film to form a barrier against moisture ingress and improve resistance to degradation by UV light.

WEATHERMAX HBR PART A & B

WEATHERMAX® HBR has been locally developed for high build roller or brush application. It is a high build recoatable polyurethane coating used over a wide range of suitably primed substrates such as mild steel, galvanised steel, concrete and aluminium.